The following cleaning instructions have been provided by G3 Solutions for proper hassle-free maintenance.
General cleaning instructions:
For normal everyday cleaning, G3 suggest the use of a mild soap and water with a soft wash cloth. Use of scouring pads or abrasive cleansers will dull the surface. Should you wish to use a product not listed below, test on a small area in the corner of the skirt before applying to the entire bathtub liner. Always review individual cleansers’ instructions. Always rinse thoroughly after cleaning.
Recommended cleaner: Dawn dish soap & water, Formula 409. Vinegar and water may also be used to soften mineral deposits. Use 1⁄2 cup Clorox Bleach per gallon of water as a disinfectant.
Do not use*
Original Clean Shower, Clean Shower for Plastic Showers & Glass, Soft Scrub, Dow disinfectant cleaner, Dow Scrubbing Bubbles, Scrub Free, Lysol disinfectant cleaner, acetone, Lestoil, ammonia, fingernail polish remover, aerosol cleaners, or scouring pads. *Use of these chemicals will cause a dull surface and/or an easily recognizable chemical crack. This will void your product warranty.
There is no need to use abrasive cleaners. Abrasive cleaners dull the gloss over a period of years. In extreme cases where the recommended cleaners do not work, use a Chore Boy or 3M Sponge pad. Make sure you use only the ones recommended for Teflon or non-stick surfaces.
Drain cleaner:
Caution: liquid drain cleaners are recommended over powders and/or crystal; however, when using liquid drain cleaning agents, bail the standing water out of the bathtub and remove the drain plug. Use a funnel to prevent spills and apply the chemicals directly down the drain. Always make certain that chemicals do not come in contact with the acrylic surface. Use drain cleaners sparingly, so that they do not boil out and attack the acrylic surface.
